Source: Bodor Laser US
Fiber laser precision and speed can finally be attained at thicknesses historically reserved for plasma cutting and waterjet in ferrous and non-ferrous metals.
Superior Cut Quality
Fiber lasers produce a narrower cut kerf than plasma, and also waste less material. Most parts can be produced without the need for secondary processing.
Unmatched Positioning Accuracy
Fiber laser cutting machines can maintain position accuracy to ~0.005” compared to plasma cutting at ~ 0.015”. When comparing head to head, fiber laser cutting offers a more narrow bevel angle than plasma cutting as well.
Less Setups Yield Lower Operating Costs
Eliminate the need for secondary finishing by dialing in your cut conditions. This yields an optimal surface finish after only one operation, due to minimal dross or slag, and less deformation of the part.
Speeds achieved cutting with a fiber laser can reach a three-fold increase over plasma cutting, and up to 8-10x the speed of waterjet cutting.
Eco-Friendly & High-Efficiency For Less
Due to the faster processing speeds and reduced energy consumption, fiber laser cutting is more cost-effective as well as less environmentally impactful. Paired with an enclosed fume collector, the air in your shop is also safer for your employees than breathing in the fumes from an open bed plasma cutter.
The utilization of a specialized air compressor and dryer system designed specifically for fiber laser cutting enables peak performance without high Oxygen or Nitrogen assist gas costs. Rigorous testing has demonstrated similar results when cutting with air, but contact us to schedule a test cut to be sure! The only drawback is a possible slight haze of oxidation at higher thicknesses due to the oxygen presence. This has not been shown to effect the application of powder coat paint directly after cutting in most cases.
Faster Cutting Speeds Combined With Lower Capital Equipment Costs, Lower Operating Costs, and Less Consumables Costs = Massively Increased Profits and Industry Leading ROI!
3/8 Inch Stainless Steel Cut with Compressed Air by 3kW to 20kW Fiber Laser
Source: Bodor Laser
Aggregate internal cutting data at Bodor Laser demonstrates when cutting 10mm, or just over 3/8 inch stainless steel, cutting speeds increase dramatically when power increases from 3kW to 20kW+. In spite of this power increase, operating costs of 3kW to 12kW only rise by a mere 2% due to the faster processing speed, using compressed air as the assist gas, and increased efficiency of fiber lasers at higher power. The resulting cutting speed is 10x and offers a cost reduction of nearly 90%!
Interested in calculating your ROI on a new fiber laser?
Follow this link:
3 comments on “Why Are Low Cost CNC Fiber Laser Cutting Machines Superior To Plasma & Waterjet Cutters?”
Good day! I just wish to give you a huge thumbs up for your excellent information you have got here on this post. I am coming back to your blog for more soon. Good day! I just wish to give you a huge thumbs up for your excellent information you have got here on this post. I am coming back to your blog for more soon. נערות ליווי בלוד
Where there is a will, there is a way.
Itís difficult to find experienced people for this topic, however, you sound like you know what youíre talking about! Thanks